GW5 Seris Outdoor Three Phase AC High Voltage Disconnecting Switch

Send Inquiry

Product Introduction

GW5 outdoor MV isolating switch is used for three-phase AC 50Hz outdoor high voltage electrical equipment, used for the line to switching under voltage pressed no load condition, and electrical isolation the maintenanced high voltage bus, circuit breakers and other electrical equipment and charged high voltage line, can also be used for the opening and closing small capacitance or inductance current. When the knife in the normal break position, can provide a insulation distance consistent with safety requirements. Widely used in 35~110kV substation.

GW5-40.5, 72.5, 126(W) I 630,1250,1600,2000 Distyle Fracture Level Rotation Outdoor Three Phase AC High Voltage Disconnecting Switch (hereinafter called switch) is supplied to high voltage circuitry for throwover under no load condition, and is used as electric disconnect for overhauled high voltage bus ,breaker and such high voltage electric device and high voltage circuitry with electricity.

GW5 IH Outdoor AC High Voltage Disconnecting Switch conforms to the following standards：
GB1984-89″AC High Voltage Disconnecting Switch and Earthing Switch"
IEC 129(1984)"AC High Voltage Disconnecting Switch and Earthing Switch"

IEC 694(1980)"Shared Terms for High Voltage Switch Devices and Control Devices Standards"

Type and Meaning

product-1-1

Normal usage condition

1. Ambient temperature, -40°C ~+40°C

2. Altitude: not over 2000m

3. Pollution degree: ⅡⅢ Ⅳ

4. Thickness of icing: not over 10m

5. Wind pressure not over 700Pa

6. Earthquake degree: not over 8 degree

7. The place where it is used is free from flammable and explosive danger, chemical corrosion and frequent intense vibration

Main technical data and mechanical feature data

1. main technical data (table 1)

No.		Product mode Rated value		GW5-40.5 II				GW5-72.5 Ⅲ				GW5-126 Ⅲ
1		Rated voltage		40.5				72.5				126
2		Rated current		630	1250	1600	2000	630	1250	1600	2000	630	1250	1600	2000
3	Disconnecling knife	Rated withstand current(peakvalue)		50	80	100	100	50	80	100	100	50	80	100	100
		Rated short-time withstand current(eflective value)kA		20	31.5	40	40	20	31.5	40	40	20	31.5	40	40
		duration of rated short circutt (8)		4
4	1-Shaped aalthing knife	Rated withstand current(peakvalue)		25
		Rated shon-time withstand current effective value)kA		10
		duration of rated short circuit (s)		4
5	1-Shaped ealthing knife	Rated withstand current(peak value)		100
		Rated shornt-time withstand current effective value)kA		40
		duration of rated short circuit (S)		4
6		Rated short-time power frequency withstand voltage(affective value kV	To earth	95				160				230
			Across the isolating distance	118				197				265
7		Rated lightning mpulse withstand voltage(effective value kV	To earth	185				350				550
			Across the isolating distance	215				385				630
8		Rated terminal static mechanical load N	Level vertical	750		750		750		750		1000		1000
			Level horizontal	500		500		500		500		750		750
			vartical force	500		750		500		750		1000		1000
9		Switch generatrix conversion current generatrix conversion voltage 100V)A		504	1000	1280	1800	504	1000	1280	1600	504	1000	1280	1600
10		Wireless electricity disturbing level		no				no				Not over 2000 μ V
11		Mechanical endurance		3000				3000				3000

No	Product modelRated value	GW5-40.5 Ⅲ				GW5-72.5 Ⅲ				GW5-126 Ⅲ
1	Fracture insulation distance of disconnecting switch after switch-off (≥mm)	400				600				1000
2	To earth insulation distance of conduclive part (≥mm)	400				600				1000
3	Main circuit resistance (su 2)	200	150	95	75	220	155	100	80	245	170	110	90
4	Closing and opening-simultaneity of 3 phase of man kninl smm	5				8				12
5	Opening and closing time combined electric motor(s	CJ6:3.75,CJ2-XG:3±1
6	Weight of Single poles(kg)	125		150		160		190		200		240

Products sort

1.Product can be sorted three models according to voltage degree: 40.5kV, 72.5kV, 126kV.

2.Product can be sorted four models according to current degree: 640A, 1250A, 1600A, 2000A,

3. Product can be sorted four models according to attached installing earthing switch: no earthing, left earthing, right earthing, double earthing. The attached installing earthing switch can be sorted two models according to short circuit current capacity: I earthing switch, n earthing switch. And dynamic short-time withstand value of n earthing switch is the same as disconnecting knife's.

Advantages:

Reliable isolation under no-load conditions.

Robust construction for harsh outdoor environments (wind, rain, pollution).

Low maintenance due to simple mechanical design.

Flexible configurations (single or double earth switches possible).

Product structure and Working principle

1. Structure

GW5 IH disconnecting switch(Fig.2, Fig.3) is composed of three single poles, operating mechanism and transmission parts. Each single pole is set in an I – shaped frame, composing of underplate, axletree seat, support insulation, connection seat, left and right contacts, earthing static contact and earthing switch knife and so on.

Main knife of three phase ac switch is combined with CS171V series human mechanism; it also can be combined with CJ6 or CJ2-XG.; earthing knife is combined with CS171V series human mechanism. When human operating mechanism combines with electromagnetic lock, electric interlock among disconnecting switch, earthing switch and breaker can efficient achieved, avoiding incorrect operation.

2.Opening operation

I.Main knife working principle

The operation of gw4 is connected with switch main shaft through vertical transmission rod, joint and universal joint, and connected with each separate single pole through joint and link rod, so that it achieve synchronous act of the three single poles.

3.Earthing knife working principle

Three single-pole earthing knives are connected through three single-pole transmission rods. Main shaft of operating mechanism is connected with one set of space four-connection rods through vertical transmission rod and joint. When the mechanism acts, closing and opening operations of earthing knife are achieved through vertical transmission rod and space four-connection rods.

4.Auxiliary switch working principle

The auxiliary switch of operating mechanism is linked with main shaft of mechanism. Break or close the relevant contacts when act opening or closing, and give the relevant signals.

5.Main, earthing knives mechanical lockout

When both of main, earthing knives are combined with human operating mechanism, the interlock between eathing switch and disconnecting switch is achieved through interlock board of mechanism. When main knife operating mechanism is combined with electric mechanism, the interlock between eathing switch and disconnecting switch is achieved through interlock board between disconnecting switch and earthing knife rotation axis.

Product outline and installation size

gw4 wholesale

Note:There are items from 11-to 15 only with 126kV witage.
fig2. GW5 111 type steel bracket sketch map of three-pole general installation (assembing manual operating machine)

Product outline and installation size

Contact Us

If you're looking to contact a supplier or manufacturer for the GW5 series outdoor three-phase high-voltage disconnecting switch. Let me know how I can assist further!Email:pannie@hdswitchgear.com.

When inquiring, include:

Rated voltage & current (e.g., 35kV, 1250A).

Manual or motorized operation.

Quantity required.

Any special requirements (e.g., extreme weather resistance).