Chassis Truck For VCB

Chassis Truck for VCB (Vacuum Circuit Breaker) is a specialized structure designed to mount, support, and facilitate the movement of a vacuum circuit breaker (VCB) within an electrical switchgear or substation. It ensures easy installation, maintenance, and operation of the VCB while providing mechanical stability and alignment.

Type description

DPC-4-□ chassis truck

DPC-4-1000/T chassis truck

DPC-4-1000/24 deepened 24KV chassis truck

Lock plate

Handle

Earthing bar

Earthing contact

Earthing clamp

DPC-4-800/VD4

DPC-4-800/VEP

DPC-4-800/XC2 (for lower layer)

DPC-4- 800 1000 /YDF deepened

DPC-4-800/YH3 deepened

DPC-4-1000/YH3

550 mid-set chassis truck

DPC-max-550 (V-max chassis truck)

DPC-4- 800 1000 /JY inspection truck

DPC chassis truck cabinet door interlock function

a. DPC-口-口/G5 chassis truck, this type of chassis truck only adds the door-closing interlock function, that is, when the cabinet door is opened, the handle cannot be inserted to shake the chassis truck, and the handle can only be inserted after the door is closed. The interlock function does not need to change the cabinet door.

b. DPC-口-口/S5 chassis truck, this type of chassis truck adds the lock door interlock function on the basis of item a. That is, when the handcart leaves the test position, the cabinet door is locked and cannot be opened. The cabinet door can only be opened when it is retracted to the test position. The interlocking function needs to change the cabinet door.

Note: The door-closing interlock structure is basically the same as the original /S, and the appearance is not much different. The modular structure is adopted for easy installation and replacement.

DPC-口-口/2J1 chassis truck with special interlock device

Overview: This interlocking device is mainly used to prevent two handcarts from entering the working position at the same time.

The main interlocking function is: two chassis trucks are controlled by one key. When any one of the chassis trucks is in the working position, the key cannot be dialed out, and the other chassis truck has no key to unlock, the handle cannot be inserted, and the chassis truck cannot shake, to prevent it from entering the working position.

When ordering:

1. If need this interlocking device, add /2J1 to the model number, a set contains 2 chassis truck and 1 key.

2. please indicate the program lock will be installed vertically or horizontally.

DPC-4-800/SHS/1J1 chassis truck with double program interlock

Hot Tags: chassis truck for vcb